:	Jul 19, 2004

.

Disconnect the battery ground cable.

.

Remove the accessory drive belt.

.

Using the special tool, retain the crankshaft front pulley.

.

:   The crankshaft pulley retaining bolt will be very tight. Remove the crankshaft pulley retaining bolt.   Discard the bolt.

.

Using the special tools, remove the crankshaft pulley.   Collect the washer.

.

Remove the special tools from the crankshaft pulley.

.

Using the special tool, remove the crankshaft front seal.

.

Check the crankshaft damper pulley and the washer for damage.

.

Clean all the crankshaft pulley mating faces.

.

Using the special tool, install the crankshaft front seal.   Lubricate the seal with clean engine oil.

.

Using the special tool, install the crankshaft pulley.   Lubricate the seal with clean engine oil.   Remove the special tool.

.

: The screw thread in the crankshaft pulley must be cleaned out before installing a new crankshaft pulley bolt. Install, but do not tighten, a new crankshaft pulley bolt.

.

Tighten the crankshaft pulley bolt.   Install the special tool.   Tighten the bolt to 45 Nm (33 lb.ft).   Tighten the bolt a further 85 degrees.   Remove the special tool.

.

Install the accessory drive belt.

.

Connect the battery ground cable.